Introduction
This user guide provides a description of the Noraxon Acquire SDK, instructions for downloading the Python-based examples, and documented FAQs for the SDK.
What is the Noraxon Acquire SDK?
The Noraxon Acquire SDK is a COM-based Software Development Kit intended for programmers to access raw data streamed from Noraxon devices. The SDK allows coders to create their own interface for capturing raw data from Noraxon devices.
The Acquire SDK can only be used on a Windows platform. The SDK is COM-based, which means it is compatible with any programming languages that support COM.
To use the Python examples with Noraxon devices, purchase of the SDK is required. Contact Us to inquire about purchasing the Noraxon Acquire SDK.
Statement of Expectation
Noraxon will provide support for the SDK to the point where the Python Example code is running and data can be visualized within the GUI. Noraxon does not provide support for custom coding projects or assistance with troubleshooting errors within the code outside the scope of the Python example code.
Download and Run the Python Example
Download the example code written in Python at the link below from the Noraxon GitHub.
The download for the code can be found under the green button at the right corner of the page.
Python Dependencies and Requirements:
Python is required. Download the latest version here: https://www.python.org/downloads/release/python-31216/
Both example scripts use the following packages:
pip install numpy pandas matplotlib comtypes threading time re sys tqdm
Using the script:
View the ReadMe for more information about the examples contained, system requirements, Python dependencies, useage, and troubleshooting.
Connecting Noraxon Hardware
Refer to the relevant Getting Started Guides for your Noraxon product to learn how to connect your systems to the PC for measurement through the Noraxon Acquire SDK.
FAQs
Q: Is the Noraxon SDK compatible with Linux?
A: No, the Noraxon Acquire SDK is currently only compatible with Windows OS.
Q: Which Noraxon devices is the SDK compatible with?
A: All Noraxon products and supported integrations are compatible with the Acquire SDK. These include:
Current Products:
- Ultium EMG
- Core EMG
- Ultium Motion
- NiNox cameras (all models)
- Zebris pressure distribution devices
Legacy products:
- DTS and TeleMyo EMG
- Research Pro IMU
Q: What signals are available throught the Noraxon SDK?
A: Any raw signals from supported Noraxon devices are available. For EMG sensors, EMG and relevant internal IMU data (e.g. from Ultium EMG sensors) are available.
For Ultium Motion sensors, only raw data (3D accel, gyro, and mag) or sensor quaternions in the World coordinate system are available. No anatomical angles are available and no calibration is applied.
Q: Should I use the Noraxon Acquire SDK or HTTP Streaming from the MR software for my application?
A: The best option depends on the type of data required, whether you need MR’s processing capabilities, and the latency requirements of your application.
1. Noraxon Acquire SDK
The Acquire SDK is a Windows-based development toolkit that allows programmers to acquire and stream raw data directly from supported Noraxon devices without running MR software.
- Data access: Provides raw sensor data, such as EMG and IMU measurements, for custom processing and analysis.
- Custom applications: Allows developers to create their own acquisition interfaces and integrate Noraxon sensor data into third-party software.
- Low latency: Recommended for applications requiring the lowest possible latency. When paired with Ultium Low Latency Mode, acquisition latency can be as low as 40 ms under supported conditions.
- Considerations: Developers are responsible for implementing any additional data processing, including calculations that would otherwise be performed by MR, such as biomechanical joint angles.
2. HTTP Streaming from MR Software
HTTP Streaming allows external applications to receive supported real-time data channels from MR while a measurement is running.
- Data access: Provides access to supported raw and processed data channels, including biomechanical joint angles calculated by myoMOTION.
- Custom applications: Allows external applications to receive MR data without independently implementing Noraxon’s acquisition and biomechanical processing algorithms.
- Latency: Additional latency is introduced by data processing and streaming, particularly when calculating joint angles from IMU measurements.
- Considerations: MR must be running with an active measurement and HTTP Streaming enabled. Acquisition and processing occur on the Windows computer running MR, but external applications can receive the data over a network.
Which should I choose?
Choose the Acquire SDK if your application requires raw sensor data, independent acquisition without MR, custom signal processing, or the lowest possible latency.
Choose HTTP Streaming if your application requires processed biomechanical data, such as joint angles, or if you want to leverage MR’s existing acquisition and processing capabilities.
Important: Low Latency Mode minimizes transmission delay but may increase the likelihood of data loss in challenging wireless environments because delayed or missing packets cannot be recovered through normal retransmission. Actual end-to-end latency depends on the complete application and should be evaluated for time-sensitive use cases.
Q: What options are available for streaming Noraxon data to third-party applications?
A: Noraxon offers several options for streaming real-time sensor data to third-party applications, including the Acquire SDK, HTTP Streaming, UDP Streaming, and Lab Streaming Layer (LSL). The best option depends on the application, the type of data required, and whether additional processing from myoRESEARCH (MR) is needed.
1. Acquire SDK
The Acquire SDK is a Windows-based development toolkit that allows programmers to acquire raw sensor data directly from supported Noraxon devices without running MR software.
- Best for: Custom acquisition applications, raw sensor data processing, and applications requiring minimal latency.
- Key advantage: Provides independent access to sensor data and supports Ultium Low Latency Mode for acquisition latency as low as 40 ms under supported conditions.
- Considerations: Developers must implement their own processing and analysis algorithms. Processed biomechanical data, such as myoMOTION joint angles, is not provided directly.
2. HTTP Streaming
HTTP Streaming allows external applications to receive supported real-time data channels from MR, including processed biomechanical data such as joint angles.
- Best for: Custom applications requiring access to MR data, particularly calculated biomechanical parameters.
- Key advantage: Leverages MR’s existing data acquisition and processing capabilities without requiring developers to reproduce those algorithms.
- Considerations: MR must be running and actively acquiring data. Additional latency may be introduced by processing and transmission.
3. UDP Streaming
UDP Streaming allows MR to transmit real-time data to external applications using the User Datagram Protocol (UDP).
- Best for: Interactive applications, and integrations with platforms such as Unity.
- Key advantage: Provides lightweight network-based data transmission suitable for applications requiring frequent updates.
- Considerations: UDP does not guarantee packet delivery or ordering, so the receiving application must be designed to accommodate potential packet loss. MR must be running to provide the data.
- NOTE: Real-time Unity streaming is not currently available in MR as of summer 2026, but will be available in the future. Contact Noraxon Support for questions.
4. Lab Streaming Layer (LSL)
LSL is a streaming framework commonly used in research to exchange and synchronize data between multiple acquisition systems and software applications.
- Best for: Multimodal research, synchronization with external acquisition systems, and integration with LSL-compatible software.
- Key advantage: Provides timestamps and clock synchronization mechanisms to support temporal alignment of data streams from different systems.
- Considerations: LSL streaming requires a compatible Noraxon receiver and supported device configuration. Synchronization accuracy depends on the complete system setup. For applications requiring precise hardware synchronization, TTL synchronization may be preferable.
Which Option Should I Choose?
For applications requiring multiple capabilities, the best solution may depend on the specific devices, data channels, and synchronization requirements.
| Application Requirement | Recommended Option |
|---|---|
| Raw sensor data with minimal latency | Acquire SDK |
| Custom software without MR | Acquire SDK |
| Processed biomechanical data, including joint angles | HTTP Streaming |
| Real-time visualization or Unity integration | UDP Streaming |
| Synchronization with other LSL-compatible systems | LSL |