Each system needs to be set-up for collection on their own RF channel. For example: If you have one Ultium system set-up to collect data on RF channel ‘1’, then you cannot set up another Ultium system to collect on this same channel. This will lead to data loss and unusable data.
To synchronize data, make sure all of your devices are connected to your MyoSync Master Station using a 3.5 mm stereo cable, and be sure to select the myoSync checkbox in the Hardware Setup in order to line up the data across systems.
If you have multiple Ultium Receivers or a Portable Lab, refer to the 🔗Portable Lab Getting Started Guide to learn how to configure multiple Ultium Receivers on differnet RF channels.
