Sensor Power Supply
Sensor Power Supply Box
for Noraxon Inline Sensors and 3rd party sensors
- Supplies power to unpowered sensors
- Allows use of Inline Sensors with all Noraxon EMG Systems
- Allows use of user-created sensors
- Unpowered sensors can be used with a 3rd party data acquisition system
- Provides power for up to 4 sensors
- More than 1 Sensor Power Supply
Product Overview
The Noraxon Sensor Power Supply provides power for Noraxon's Inline Sensors and/or other sensors. The Power Supply outputs the signal to an A/D box, e.g. National Instruments, or Noraxon's NorBNC. The Sensor Power Supply gives users the flexibility to use the Noraxon Inline Sensors or other sensors with most A/D boards and older Noraxon EMG systems.
Bilateral Ground Contact
The Noraxon Sensor Power Supply provides the flexibility to use Noraxon's Inline Sensors with older Noraxon EMG Systems, e.g. TeleMyo 900, MyoSystem 1200 and MyoSystem 2000. The Sensor Power Supply also allows user-created and 3rd party sensors with older Noraxon EMG Systems. The Sensor Power Supply unit gives the user freedom to use any Noraxon Inline Sensors, user-created or 3rd party sensors with their own data acquisition system. This small, lightweight Power Supply is easy to use in many different configurations.
System Configurations
Technical Specifications
Number of inputs:
|
4 |
Input Connectors:
|
4 each 4-pin Binder Female |
Number of outputs:
|
4 |
Output Connectors:
|
2 each 3.5 mm stereo jacks |
Optional Output Cables:
|
2 each 10 feet long terminated in 4 BNC connectors |
| Power Supplied: |
+5V +/- .05V
-5V +/- .05V |
| Combined Current: |
+/- 40 mA max (all 4 ports active) |
| Battery Source: |
2 each 1.5V AA Disposable Cells (Lithium recommended) |
| Operating Time: |
8.5 Hrs minimum using Lithium cells
(worst case all 4 inputs maximally active)
6.5 Hrs minimum using Alkaline cells
(worst case all 4 inputs maximally active) |
«Back |
