DTS Force Sensor
Linear Force Measurement Load Cell
for Noraxon TeleMyo DTS System
- Measures pull and push force
- Can be used for static force tests with cable and training equipment
- Available in two sizes/ranges
Product Overview
The DTS Force Sensor is a precision load cell allowing measurement of both tension and
compression. The sensor is available in two sizes / measurement ranges:
- 0-100 lb-F ( 0-444 N)
- 0-500 lb-F (0-2224 N)
The sensor has a predefined measurement setup in all the Noraxon software packages and is operational in a few seconds:
MyoResearch XP Sensor selection screen
Application Examples
The sensor can be used with any commercial cable training machine. This arrangement allows you to create numerous test positions to test static force in a functional manner. Such test setups can be used to document therapy and training improvements.
Force cell used in a commercial
cable training machine
The sensor can be integrated with most cable machines
Special Belt Adapter
A special adapter allows you to attach the sensor to weight stack belts of exercise machines without cutting the belt. The same sensor will work on various machines.
Specifications
Features:
- Accurately measures forces up to 100 or 500 pounds
- Measures both tension and compression (negative output)
Physical (probe only):
- Length: 1.34 in (3.4 cm)
- Width: 0.95 in (2.4 cm)
- Height: 0.55 in (1.5 cm)
- Weight (sensor probe only): 0.6 oz (17g)
- Weight (sensor probe with cable): 1.0 oz (28.3g)
Limits:
- Input Force Range: +/- 500 lb-F (+/- 2224 N)
- Sensitivity for 500 lb Sensor: 10mV / lb-F (2.27 mV / N)
- Sensitivity for 100 lb Sensor: 50mV / lb-F (11.35 mV/ N)
«Back |
