 |
|
USB A/D Converter
USB A/D is used with the MyoSystem 1200, MyoSystem 2000 and TeleMyo
900 replaces PCI or PCMCIA based A/D boards and allows user to connect
MyoSystem 1200 and 2000 series directly to the PC USB connector. With:
- USB cable to PC
- Ribbon interface cable to the MyoSystem
|
|
 |
NorBNC
Two-mode 16 channel BNC signal routing unit. Input mode: analog
signals applied to BNC connectors, 16 switches select EMG or BNC signals
as inputs to A/D Output mode: EMG signals delivered to all 16 BNC connector
outputs.
- Input cable from the MyoSystem
- Output cable to USB A/D system
Learn more about NorBNC...
|
|
 |
Signal Isolation Unit
Battery driven analog signal isolation, accepts analog inputs up to +/-
10 volts. Provides outputs that are isolated replicas of the input signals.
Selectable gain of x 1 or x 0.5 per channel.
- For 3 input channels
- For 6 input channels
Learn more about Signal Isolation
Unit ...
|
|
 |
USB Isolated
A/D System
The USB Isolated A/D System is an accessory unit that allows EMG signals
to be measured safely in sync with other analog kinematic signals. The
system consists of six analog inputs that are arranged as two independently
isolated sets: two and four channels.
Learn more about USB Isolated A/D
System...
|
|
 |
Multi-Tester
General purpose testing device. Generates precise signals for testing
active lead and EMG system performance. Digital display measures electrode
contact impedance at various (20, 100, 200 Hz) frequencies.
|
|
 |
Impedance Checker
Quickly obtain "Pass/ Fail" status of the electrode electrical
connection (contact impedance) prior to making EMG measurements. Easy to
read color coded display identifies impedance levels of 2K, 5K, 10Kohm (pass)
and 50Kohm (fail). Uses a safe 100Hz, 50uA testing signal. |
|
 |
Fine-Wire Adaptor
Adapts standard snap connectors for use with fine-wire electrodes. Two
styles are available and both types use a coiled spring for making a connection
to the fine-wire.
- Floating fine-wire adapter, per muscle (set of 2 leads)
- Anchored fine-wire adapter, per muscle (1 board)
|
|
Electrodes
|
|
|
|
Single Electrode
- Noraxon Brand
|
Noraxon Single Electrodes
The single electrodes are disposable, self-adhesive Ag/AgCl snap electrodes
for surface EMG applications only. Di-ameter of the circular adhesive
area is 3.8 cm (1 ½"); diameter of the circular conductive
area is 1 cm (7/16"). Each re-sealable pouch contains 30 single electrodes;
20 pouches in a case, totaling 600 single electrodes per case. Electrodes
are hypoallergenic gel and adhesive.
Learn more about Single Electrodes...
|
|
|
Dual Electrode
- Noraxon Brand
|
Noraxon Dual Electrodes
The dual electrodes are disposable, self-adhesive Ag/AgCl dual snap electrodes
for surface EMG applications only. Dimensions of the figure 8-shaped adhesive
area are 4 cm x 2.2 cm (1 9/16" x 7/8"); diameter of each of
the two circular conductive areas is 1 cm (7/16"), inter-electrode
distance is 2 cm (¾"). Electrodes are hypoallergenic gel and
adhesive.
Learn more about Dual Electrodes...
|
|
|
Blue Sensor Electrode
- By Ambu
|
Blue Sensor Electrodes
Blue Sensor electrodes are manufactured by Ambu. These are disposable,
self-adhesive Ag/AgCl electrodes with decentralized snaps.
Learn more about Blue Sensor Electrodes...
|
